| Products - Stainless & Stainless Steel | |||
| 308L FLUX CORED AWS A5.22 E308LT1-1/T1-4. All position flux cored, gas shielded wire for joining and cladding of types 301, 302, 304, 304L and 308L austenitic stainless steel. CWB certified. |
Polarity: DC Reverse Tensile Strength: Up to 85,600 PSI Elongation:45% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| 309L FLUX CORED AWS A5.22 E309LT1-1/T1-4. All position flux cored, gas shielded wire designed for joining and cladding of type 309 stainless steel in wrought or cast form. CWB certified. |
Polarity: DC Reverse Tensile Strength: Up to 88,500 PSI Elongation:35% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| 316L FLUX CORED AWS A5.22 E316LT1-1/T1-4. All position flux cored, gas shielded wire for joining and cladding of type 316 stainless steel and similar stainless alloys. CWB certified. |
Polarity: DC Reverse Tensile Strength: Up to 85,600 PSI Elongation: 40% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| DHO (E316L-16) Designed for vertical down welding with minimum slag interference. For type 316 stainless and low carbon, molybdenum bearing austenitic steels. Weld metal composition is 18% Cr, 12% Ni, and 2.5% Mo. |
Polarity: DC Reverse Tensile Strength: Up to 80,000 PSI Elongation: 40% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E2209-16 AWS A5.4 E2209-16. Electrode primarily used for welding duplex stainless steels that contain approximately 22% chromium. Deposit has a duplex microstructure consisting of an austenite-ferrite matrix. |
Polarity: DC Reverse or AC Tensile Strength: Up to 100,000 PSI Elongation: 20% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E308L-0 AWS A5.22 E308LT0-3. Flux cored, self-shielding wire for joining and cladding 308L and lower grades of stainless steel. |
Polarity: DC Reverse Tensile Strength: Up to 86,000 PSI Elongation: 45% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E308L-17 AWS A5.4 E308L-17. Premium quality electrode for welding low carbon base material of similar composition. E308L grades are also available in MIG wire and TIG rods. |
Polarity: DC Reverse or AC Tensile Strength: Up to 83,700 PSI Elongation: 40-52% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E309L-0 AWS A5.22 E309LT0-3. Flux cored, self-shielding wire for joining and cladding of 309L grade stainless steel. |
Tensile
Strength: Up to 84,500 PSI Elongation: 37% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E309L-17 AWS A5.4 E309L-17. Electrode for joining and cladding steels of similar composition, and for joining dissimilar steels such as stainless to carbon steel. E309L grades are also available in MIG wire and TIG rods. |
Polarity: DC Reverse or AC Tensile Strength: Up to 85,500 PSI Elongation: 35-45% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E310-16 AWS A5.4 E310-17. Electrode primarily used for welding type 310 stainless steel. The deposit exhibits the same chemical and oxidation resistant qualities as the base metal. E310 grade is also available in MIG wire and TIG rods. |
Polarity: DC Reverse or AC Tensile Strength: Up to 95,000 PSI Elongation: 35-45% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E316L-17 AWS A5.4 E316L-17. Electrode primarily used for welding low carbon molybdenum bearing austenitic alloys. Good resistance to corrosion. E316L grades are also available in MIG wire and TIG rods. |
Polarity: DC Reverse or AC Tensile Strength: Up to 77,500 PSI Elongation: 45% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| E385-16 AWS A5.4 E385-16. Electrode primarily used for welding type 904L material or alloys of similar composition and is utilized in severely corrosive environments. |
Polarity: DC Reverse or AC Tensile Strength: Up to 86,500 PSI Elongation: 36% Process: SMAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER308L TIG AWS A5.9 ER308L. Gas shielded TIG rod. For welding austenitic stainless types 301, 302, 304, 308 and base metals of similar composition. Also available in MIG wire. |
Tensile
Strength: Up to 75,000 PSI Elongation: 35% Process: GTAW or TIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER308L MIG AWS A5.9 ER308L. Gas shielded MIG wire. For welding austenitic stainless types 301, 302, 304, 308 and base metals of similar composition. Also available in TIG rod. |
Tensile
Strength: Up to 75,000 PSI Elongation: 35% Process: GMAW or MIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER309L TIG AWS A5.9 ER309L. Gas shielded TIG rod. For joining and cladding similar alloys in wrought or cast stainless and joining stainless to carbon steel. Also available in MIG wire. |
Tensile
Strength: Up to 80,000 PSI Elongation: 30% Process: GTAW or TIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER309L MIG AWS A5.9 ER309L. Gas shielded MIG wire. For joining and cladding similar alloys in wrought or cast stainless and joining stainless to carbon steel. Also available in TIG rods. |
Tensile
Strength: Up to 80,000 PSI Elongation: 30% Process: GMAW or MIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER316L TIG AWS A5.9 ER316L. Gas shielded TIG rod. For welding low carbon molybdenum bearing austenitic alloys and 316 grade stainless steel. Also available in MIG wire. |
Tensile
Strength: Up to 70,000 PSI Elongation: 30% Process: GTAW or TIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER316L MIG AWS A5.9 ER316L. Gas shielded MIG wire. For welding low carbon molybdenum bearing austenitic alloys and 316 grade stainless steel. Also available in TIG rods. |
Tensile
Strength: Up to 70,000 PSI Elongation: 30% Process: GMAW or MIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER317L TIG AWS A5.9 ER317L. Gas shielded TIG rod. For welding alloys of similar composition. Utilized in severely corrosive environments where pitting is a concern. Also available in MIG wire. |
Tensile
Strength: Up to 75,500 PSI Elongation: 30% Process: GTAW or TIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| ER317L MIG AWS A5.9 ER317L. Gas shielded MIG wire. For welding alloys of similar composition. Utilized in severely corrosive environments where pitting is a concern. Also available in TIG rods. |
Tensile
Strength: Up to 75,500 PSI Elongation: 30% Process: GMAW or MIG |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS 2780 All position, flux cored wire for joining dissimilar steels, cladding, and build-up. Can be used for installing Arctec® wear plates and replacement tips. Shielding gas is required. |
Tensile
Strength: Up to 85,400 PSI Elongation: 37% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS 2780 All position gas shielded flux core wire for joining dissimilar steel, cladding and shaft build-up. Used for installing Arctec® wear plates. |
Tensile
Strength: Up to 85,400 PSI Elongation: 37% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS 308L AWS A5.22 E308LT1-1/T1-4. All position flux cored, gas shielded wire for joining and cladding of types 301, 302, 304, 304L and 308L austenitic stainless steel. CWB certified. Also available in flat and horizontal position only wire. (FHP) |
Tensile
Strength: Up to 86,000 PSI Elongation: 45% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS309L AWS A5.22 E309LT1-1/T1-4. All position flux cored, gas shielded wire designed for joining and cladding of type 309 stainless steel in wrought or cast form. CWB certified. Also available in flat and horizontal position only wire. (FHP) |
Tensile
Strength: Up to 84,500 PSI Elongation: 37% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS 316L AWS A5.22 E316LT1-1/T1-4. All position flux cored, gas shielded wire for joining and cladding of type 316 stainless steel and similar stainless alloys. CWB certified. Also available in flat and horizontal position only wire. (FHP) |
Tensile
Strength: Up to 89,200 PSI Elongation: 36% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
| FCS 317L AWS A5.22 E317LT1-1/T1-4. All position flux cored, gas shielded wire for joining and cladding alloys of similar composition. Utilized in severely corrosive environments where pitting is a concern. |
Tensile
Strength: Up to 91,700 PSI Elongation: 34% Process: FCAW |
||
| MSDS INFORMATION | DATA SHEET | ||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||||||
 |
 |
|
 |
|||||||||||||
 |
Home | Company | Products | Contact/Locations | Links ©2010, Arctec Alloys Limited. All Rights Reserved. Website: UniMark Creative Services |
 |
||||||||||||||
 |
 |
 |
||||||||||||||